And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.357
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.825
And
I accept adding "cowsay" to Additional Software
3.013
And
Additional Software is correctly configured for package "cowsay"
0.940
And
I shutdown Tails and wait for the computer to power off
4.378
And
I start Tails from USB drive "__internal" with network unplugged
58.891
And
I enable persistence
11.543
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
39.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.561
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.086
And
available upgrades have been checked
2.226
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.751
And
I can open the Additional Software configuration window from the notification
3.127
And
I shutdown Tails and wait for the computer to power off
2:7.474
And
I start Tails from USB drive "__internal" with network unplugged
59.421
And
I enable persistence
14.128
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
44.568
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109