And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.679
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.627
And
I accept adding "cowsay" to Additional Software
6.738
And
Additional Software is correctly configured for package "cowsay"
1.456
And
I shutdown Tails and wait for the computer to power off
6.576
And
I start Tails from USB drive "__internal" with network unplugged
58.964
And
I enable persistence
13.535
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
43.752
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.075
And
available upgrades have been checked
0.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.999
And
I can open the Additional Software configuration window from the notification
2.649
And
I shutdown Tails and wait for the computer to power off
19.389
And
I start Tails from USB drive "__internal" with network unplugged
1:0.446
And
I enable persistence
17.120
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
40.381
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090