And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.215
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.745
And
I accept adding "cowsay" to Additional Software
6.691
And
Additional Software is correctly configured for package "cowsay"
0.924
And
I shutdown Tails and wait for the computer to power off
4.542
And
I start Tails from USB drive "__internal" with network unplugged
59.600
And
I enable persistence
11.418
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
39.011
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.466
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.069
And
available upgrades have been checked
3.641
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.764
And
I can open the Additional Software configuration window from the notification
4.076
And
I shutdown Tails and wait for the computer to power off
2:2.060
And
I start Tails from USB drive "__internal" with network unplugged
59.530
And
I enable persistence
13.031
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
38.772
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.638
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098