And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:3.477
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.033
And
I accept adding "cowsay" to Additional Software
4.325
And
Additional Software is correctly configured for package "cowsay"
1.152
And
I shutdown Tails and wait for the computer to power off
6.824
And
I start Tails from USB drive "__internal" with network unplugged
1:3.873
And
I enable persistence
18.870
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
40.383
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.789
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.267
And
I can open the Additional Software configuration window from the notification
2.524
And
I shutdown Tails and wait for the computer to power off
17.969
And
I start Tails from USB drive "__internal" with network unplugged
1:1.922
And
I enable persistence
13.337
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
42.031
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.774
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.608
Then
the Additional Software upgrade service has started
0.210
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111