And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.898
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.573
And
I accept adding "cowsay" to Additional Software
4.407
And
Additional Software is correctly configured for package "cowsay"
0.818
And
I shutdown Tails and wait for the computer to power off
4.459
And
I start Tails from USB drive "__internal" with network unplugged
58.602
And
I enable persistence
13.249
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
37.295
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.639
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.105
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.479
And
I can open the Additional Software configuration window from the notification
3.061
And
I shutdown Tails and wait for the computer to power off
2:8.338
And
I start Tails from USB drive "__internal" with network unplugged
59.269
And
I enable persistence
12.909
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.760
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.749
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.199
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087