And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.232
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.371
And
I accept adding "cowsay" to Additional Software
6.816
And
Additional Software is correctly configured for package "cowsay"
0.961
And
I shutdown Tails and wait for the computer to power off
6.228
And
I start Tails from USB drive "__internal" with network unplugged
59.822
And
I enable persistence
16.760
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
33.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.989
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.078
And
available upgrades have been checked
0.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.639
And
I can open the Additional Software configuration window from the notification
2.714
And
I shutdown Tails and wait for the computer to power off
12.899
And
I start Tails from USB drive "__internal" with network unplugged
1:4.494
And
I enable persistence
14.466
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
44.128
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
34.685
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085