And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:44.846
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.886
And
I accept adding "cowsay" to Additional Software
6.512
And
Additional Software is correctly configured for package "cowsay"
0.878
And
I shutdown Tails and wait for the computer to power off
4.366
And
I start Tails from USB drive "__internal" with network unplugged
58.966
And
I enable persistence
13.124
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
39.871
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.308
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.076
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.157
And
I can open the Additional Software configuration window from the notification
3.073
And
I shutdown Tails and wait for the computer to power off
2:8.554
And
I start Tails from USB drive "__internal" with network unplugged
59.876
And
I enable persistence
13.751
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
41.714
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097