And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.357
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.027
And
I accept adding "cowsay" to Additional Software
4.279
And
Additional Software is correctly configured for package "cowsay"
0.939
And
I shutdown Tails and wait for the computer to power off
6.441
And
I start Tails from USB drive "__internal" with network unplugged
58.943
And
I enable persistence
11.770
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
39.464
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.327
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.074
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.836
And
I can open the Additional Software configuration window from the notification
2.796
And
I shutdown Tails and wait for the computer to power off
19.459
And
I start Tails from USB drive "__internal" with network unplugged
1:7.126
And
I enable persistence
11.780
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.766
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101