And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.235
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.000
And
I accept adding "cowsay" to Additional Software
5.448
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
4.382
And
I start Tails from USB drive "__internal" with network unplugged
59.270
And
I enable persistence
14.141
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
41.977
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.987
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.101
And
the network is plugged
0.079
And
available upgrades have been checked
1.280
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.661
And
I can open the Additional Software configuration window from the notification
3.281
And
I shutdown Tails and wait for the computer to power off
2:3.927
And
I start Tails from USB drive "__internal" with network unplugged
58.448
And
I enable persistence
13.251
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.878
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.720
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086