And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.958
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.409
And
I accept adding "cowsay" to Additional Software
5.555
And
Additional Software is correctly configured for package "cowsay"
1.019
And
I shutdown Tails and wait for the computer to power off
4.578
And
I start Tails from USB drive "__internal" with network unplugged
1:0.884
And
I enable persistence
15.546
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
41.520
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.123
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.095
And
the network is plugged
0.077
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.754
And
I can open the Additional Software configuration window from the notification
3.450
And
I shutdown Tails and wait for the computer to power off
2:3.770
And
I start Tails from USB drive "__internal" with network unplugged
1:1.124
And
I enable persistence
12.667
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
43.052
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.768
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072