And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.764
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.564
And
I accept adding "cowsay" to Additional Software
6.608
And
Additional Software is correctly configured for package "cowsay"
0.949
And
I shutdown Tails and wait for the computer to power off
6.656
And
I start Tails from USB drive "__internal" with network unplugged
1:0.516
And
I enable persistence
13.342
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
41.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.273
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.127
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.172
And
I can open the Additional Software configuration window from the notification
2.781
And
I shutdown Tails and wait for the computer to power off
18.974
And
I start Tails from USB drive "__internal" with network unplugged
1:0.847
And
I enable persistence
14.806
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
45.032
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.438
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101