And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.682
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.920
And
I accept adding "cowsay" to Additional Software
6.535
And
Additional Software is correctly configured for package "cowsay"
0.981
And
I shutdown Tails and wait for the computer to power off
4.448
And
I start Tails from USB drive "__internal" with network unplugged
58.714
And
I enable persistence
12.395
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
39.029
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.115
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.064
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.388
And
I can open the Additional Software configuration window from the notification
3.023
And
I shutdown Tails and wait for the computer to power off
2:2.418
And
I start Tails from USB drive "__internal" with network unplugged
1:0.042
And
I enable persistence
13.564
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
37.875
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076