And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.497
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.340
And
I accept adding "cowsay" to Additional Software
7.770
And
Additional Software is correctly configured for package "cowsay"
0.826
And
I shutdown Tails and wait for the computer to power off
6.420
And
I start Tails from USB drive "__internal" with network unplugged
59.477
And
I enable persistence
12.194
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
43.367
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.986
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.067
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.941
And
I can open the Additional Software configuration window from the notification
2.809
And
I shutdown Tails and wait for the computer to power off
2:6.586
And
I start Tails from USB drive "__internal" with network unplugged
59.555
And
I enable persistence
13.382
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
32.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086