And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.712
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.467
And
I accept adding "cowsay" to Additional Software
9.200
And
Additional Software is correctly configured for package "cowsay"
1.059
And
I shutdown Tails and wait for the computer to power off
6.225
And
I start Tails from USB drive "__internal" with network unplugged
1:7.261
And
I enable persistence
13.162
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
45.350
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.850
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.311
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
9.198
And
I can open the Additional Software configuration window from the notification
2.683
And
I shutdown Tails and wait for the computer to power off
20.115
And
I start Tails from USB drive "__internal" with network unplugged
1:0.037
And
I enable persistence
12.732
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
40.327
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
40.979
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083