And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.472
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.258
And
I accept adding "cowsay" to Additional Software
4.453
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
6.422
And
I start Tails from USB drive "__internal" with network unplugged
1:8.006
And
I enable persistence
12.522
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
40.295
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.652
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.093
And
available upgrades have been checked
2.508
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.520
And
I can open the Additional Software configuration window from the notification
2.788
And
I shutdown Tails and wait for the computer to power off
8.286
And
I start Tails from USB drive "__internal" with network unplugged
59.762
And
I enable persistence
12.308
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
39.160
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.380
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100