And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.787
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.006
And
I accept adding "cowsay" to Additional Software
5.952
And
Additional Software is correctly configured for package "cowsay"
1.326
And
I shutdown Tails and wait for the computer to power off
4.439
And
I start Tails from USB drive "__internal" with network unplugged
1:0.768
And
I enable persistence
14.480
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.117
And
I log in to a new session
41.471
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.720
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.115
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.067
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.549
And
I can open the Additional Software configuration window from the notification
2.707
And
I shutdown Tails and wait for the computer to power off
2:3.356
And
I start Tails from USB drive "__internal" with network unplugged
1:3.339
And
I enable persistence
16.107
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
44.111
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086