And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:38.848
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.088
And
I accept adding "cowsay" to Additional Software
4.260
And
Additional Software is correctly configured for package "cowsay"
0.998
And
I shutdown Tails and wait for the computer to power off
6.633
And
I start Tails from USB drive "__internal" with network unplugged
1:3.130
And
I enable persistence
13.195
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
37.271
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.536
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.089
And
I prepare the Additional Software upgrade process to fail
0.104
And
the network is plugged
0.126
And
available upgrades have been checked
0.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.219
And
I can open the Additional Software configuration window from the notification
2.621
And
I shutdown Tails and wait for the computer to power off
19.777
And
I start Tails from USB drive "__internal" with network unplugged
1:11.588
And
I enable persistence
18.459
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
45.266
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.307
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.261
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.120