And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.991
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.919
And
I accept adding "cowsay" to Additional Software
7.134
And
Additional Software is correctly configured for package "cowsay"
0.986
And
I shutdown Tails and wait for the computer to power off
6.287
And
I start Tails from USB drive "__internal" with network unplugged
1:2.131
And
I enable persistence
12.714
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
40.334
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.076
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.193
And
I can open the Additional Software configuration window from the notification
2.944
And
I shutdown Tails and wait for the computer to power off
14.740
And
I start Tails from USB drive "__internal" with network unplugged
59.367
And
I enable persistence
12.893
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
40.263
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.659
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.094
Then
the Additional Software upgrade service has started
0.223
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101