And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.667
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.278
And
I accept adding "cowsay" to Additional Software
8.114
And
Additional Software is correctly configured for package "cowsay"
1.218
And
I shutdown Tails and wait for the computer to power off
6.745
And
I start Tails from USB drive "__internal" with network unplugged
1:6.144
And
I enable persistence
15.629
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.150
And
I log in to a new session
49.757
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.274
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.072
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.352
And
I can open the Additional Software configuration window from the notification
3.024
And
I shutdown Tails and wait for the computer to power off
13.249
And
I start Tails from USB drive "__internal" with network unplugged
1:0.446
And
I enable persistence
13.333
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
46.616
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.647
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.100
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103