And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.256
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.518
And
I accept adding "cowsay" to Additional Software
4.404
And
Additional Software is correctly configured for package "cowsay"
0.967
And
I shutdown Tails and wait for the computer to power off
6.517
And
I start Tails from USB drive "__internal" with network unplugged
1:10.836
And
I enable persistence
15.066
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
43.340
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.077
And
available upgrades have been checked
0.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.102
And
I can open the Additional Software configuration window from the notification
2.814
And
I shutdown Tails and wait for the computer to power off
2:3.305
And
I start Tails from USB drive "__internal" with network unplugged
1:0.689
And
I enable persistence
12.999
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
41.935
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.528
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.203
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101