And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.694
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.106
And
I accept adding "cowsay" to Additional Software
6.013
And
Additional Software is correctly configured for package "cowsay"
1.022
And
I shutdown Tails and wait for the computer to power off
6.617
And
I start Tails from USB drive "__internal" with network unplugged
1:1.969
And
I enable persistence
18.622
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
41.857
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.508
And
available upgrades have been checked
1.248
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.139
And
I can open the Additional Software configuration window from the notification
3.054
And
I shutdown Tails and wait for the computer to power off
12.843
And
I start Tails from USB drive "__internal" with network unplugged
1:6.648
And
I enable persistence
15.854
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
40.147
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.673
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.209
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097