And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.538
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.641
And
I accept adding "cowsay" to Additional Software
6.443
And
Additional Software is correctly configured for package "cowsay"
0.966
And
I shutdown Tails and wait for the computer to power off
6.393
And
I start Tails from USB drive "__internal" with network unplugged
1:4.226
And
I enable persistence
16.430
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
41.402
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.029
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.080
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.672
And
I can open the Additional Software configuration window from the notification
2.891
And
I shutdown Tails and wait for the computer to power off
17.532
And
I start Tails from USB drive "__internal" with network unplugged
1:7.307
And
I enable persistence
12.848
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
44.315
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.633
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073