And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.097
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.771
And
I accept adding "cowsay" to Additional Software
7.575
And
Additional Software is correctly configured for package "cowsay"
1.079
And
I shutdown Tails and wait for the computer to power off
6.680
And
I start Tails from USB drive "__internal" with network unplugged
59.087
And
I enable persistence
12.141
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
38.699
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.982
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.073
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.061
And
I can open the Additional Software configuration window from the notification
3.159
And
I shutdown Tails and wait for the computer to power off
2:2.210
And
I start Tails from USB drive "__internal" with network unplugged
59.138
And
I enable persistence
13.580
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
44.894
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.586
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100