And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:50.728
And
I configure APT to prefer an old version of cowsay
0.066
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.105
And
I accept adding "cowsay" to Additional Software
7.003
And
Additional Software is correctly configured for package "cowsay"
1.022
And
I shutdown Tails and wait for the computer to power off
6.273
And
I start Tails from USB drive "__internal" with network unplugged
1:1.169
And
I enable persistence
12.556
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
37.400
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.074
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.084
And
available upgrades have been checked
0.313
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.969
And
I can open the Additional Software configuration window from the notification
3.540
And
I shutdown Tails and wait for the computer to power off
12.555
And
I start Tails from USB drive "__internal" with network unplugged
1:6.498
And
I enable persistence
11.642
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
38.479
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.751
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083