And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.318
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.107
And
I accept adding "cowsay" to Additional Software
7.024
And
Additional Software is correctly configured for package "cowsay"
0.800
And
I shutdown Tails and wait for the computer to power off
6.519
And
I start Tails from USB drive "__internal" with network unplugged
1:0.165
And
I enable persistence
13.193
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
40.512
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.349
And
available upgrades have been checked
2.338
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.715
And
I can open the Additional Software configuration window from the notification
2.901
And
I shutdown Tails and wait for the computer to power off
2:8.815
And
I start Tails from USB drive "__internal" with network unplugged
1:2.189
And
I enable persistence
11.835
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.338
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.739
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096