And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:38.581
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.329
And
I accept adding "cowsay" to Additional Software
3.156
And
Additional Software is correctly configured for package "cowsay"
0.946
And
I shutdown Tails and wait for the computer to power off
6.551
And
I start Tails from USB drive "__internal" with network unplugged
1:2.319
And
I enable persistence
23.858
And
I configure APT to prefer an old version of cowsay
0.085
And
I disable the tails-virt-notify-user.service user unit
0.244
And
I log in to a new session
39.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.674
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.090
And
the network is plugged
0.580
And
available upgrades have been checked
0.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.624
And
I can open the Additional Software configuration window from the notification
3.307
And
I shutdown Tails and wait for the computer to power off
2:8.451
And
I start Tails from USB drive "__internal" with network unplugged
1:1.707
And
I enable persistence
13.043
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
37.639
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.745
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106