And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.934
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.201
And
I accept adding "cowsay" to Additional Software
6.977
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
6.914
And
I start Tails from USB drive "__internal" with network unplugged
1:5.647
And
I enable persistence
15.447
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
44.021
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.531
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.136
And
available upgrades have been checked
2.542
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.447
And
I can open the Additional Software configuration window from the notification
4.269
And
I shutdown Tails and wait for the computer to power off
2:7.418
And
I start Tails from USB drive "__internal" with network unplugged
1:1.442
And
I enable persistence
13.580
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
45.311
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.995
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093