And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.205
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.833
And
I accept adding "cowsay" to Additional Software
6.757
And
Additional Software is correctly configured for package "cowsay"
0.990
And
I shutdown Tails and wait for the computer to power off
4.481
And
I start Tails from USB drive "__internal" with network unplugged
59.455
And
I enable persistence
11.501
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.135
And
I log in to a new session
41.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.079
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.354
And
I can open the Additional Software configuration window from the notification
3.116
And
I shutdown Tails and wait for the computer to power off
2:7.721
And
I start Tails from USB drive "__internal" with network unplugged
58.409
And
I enable persistence
11.334
And
I configure APT to prefer an old version of cowsay
0.043
And
I log in to a new session
45.921
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.160
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109