And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.434
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.329
And
I accept adding "cowsay" to Additional Software
7.076
And
Additional Software is correctly configured for package "cowsay"
0.927
And
I shutdown Tails and wait for the computer to power off
4.446
And
I start Tails from USB drive "__internal" with network unplugged
1:5.353
And
I enable persistence
11.187
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
37.316
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.906
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.082
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.471
And
I can open the Additional Software configuration window from the notification
3.076
And
I shutdown Tails and wait for the computer to power off
2:7.573
And
I start Tails from USB drive "__internal" with network unplugged
57.210
And
I enable persistence
10.442
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.574
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.874
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088