And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:52.414
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.354
And
I accept adding "cowsay" to Additional Software
5.879
And
Additional Software is correctly configured for package "cowsay"
1.027
And
I shutdown Tails and wait for the computer to power off
6.625
And
I start Tails from USB drive "__internal" with network unplugged
1:2.765
And
I enable persistence
13.635
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
45.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.089
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.075
And
available upgrades have been checked
1.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.582
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
2:1.779
And
I start Tails from USB drive "__internal" with network unplugged
1:5.482
And
I enable persistence
13.223
And
I configure APT to prefer an old version of cowsay
0.043
And
I log in to a new session
44.514
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.191
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096