And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.732
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.860
And
I accept adding "cowsay" to Additional Software
4.832
And
Additional Software is correctly configured for package "cowsay"
0.991
And
I shutdown Tails and wait for the computer to power off
6.694
And
I start Tails from USB drive "__internal" with network unplugged
1:1.188
And
I enable persistence
13.014
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
41.985
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.038
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.064
And
available upgrades have been checked
0.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.958
And
I can open the Additional Software configuration window from the notification
2.273
And
I shutdown Tails and wait for the computer to power off
10.933
And
I start Tails from USB drive "__internal" with network unplugged
1:3.558
And
I enable persistence
13.628
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
42.433
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086