And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.424
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.158
And
I accept adding "cowsay" to Additional Software
6.815
And
Additional Software is correctly configured for package "cowsay"
0.889
And
I shutdown Tails and wait for the computer to power off
6.859
And
I start Tails from USB drive "__internal" with network unplugged
1:5.913
And
I enable persistence
13.780
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
41.439
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.917
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.117
And
available upgrades have been checked
0.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.950
And
I can open the Additional Software configuration window from the notification
3.301
And
I shutdown Tails and wait for the computer to power off
16.094
And
I start Tails from USB drive "__internal" with network unplugged
1:11.614
And
I enable persistence
13.312
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
40.503
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.574
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112