And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.181
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.970
And
I accept adding "cowsay" to Additional Software
5.556
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
6.240
And
I start Tails from USB drive "__internal" with network unplugged
1:0.686
And
I enable persistence
11.713
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
42.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.554
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.073
And
available upgrades have been checked
1.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.752
And
I can open the Additional Software configuration window from the notification
2.803
And
I shutdown Tails and wait for the computer to power off
2:6.837
And
I start Tails from USB drive "__internal" with network unplugged
59.433
And
I enable persistence
12.168
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
40.590
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076