And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.962
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.650
And
I accept adding "cowsay" to Additional Software
5.486
And
Additional Software is correctly configured for package "cowsay"
0.937
And
I shutdown Tails and wait for the computer to power off
6.384
And
I start Tails from USB drive "__internal" with network unplugged
58.634
And
I enable persistence
12.650
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
37.984
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.032
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.086
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.745
And
I can open the Additional Software configuration window from the notification
3.168
And
I shutdown Tails and wait for the computer to power off
2:7.054
And
I start Tails from USB drive "__internal" with network unplugged
58.465
And
I enable persistence
10.716
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
38.710
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.482
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098