And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.010
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.086
And
I accept adding "cowsay" to Additional Software
4.665
And
Additional Software is correctly configured for package "cowsay"
1.019
And
I shutdown Tails and wait for the computer to power off
8.575
And
I start Tails from USB drive "__internal" with network unplugged
1:4.901
And
I enable persistence
14.354
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
33.495
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.091
And
available upgrades have been checked
1.301
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.266
And
I can open the Additional Software configuration window from the notification
2.999
And
I shutdown Tails and wait for the computer to power off
2:3.842
And
I start Tails from USB drive "__internal" with network unplugged
1:2.941
And
I enable persistence
13.305
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
43.444
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.973
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.096
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108