And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.949
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.259
And
I accept adding "cowsay" to Additional Software
4.517
And
Additional Software is correctly configured for package "cowsay"
0.897
And
I shutdown Tails and wait for the computer to power off
4.369
And
I start Tails from USB drive "__internal" with network unplugged
1:0.014
And
I enable persistence
12.776
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
42.416
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.079
And
available upgrades have been checked
1.202
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.599
And
I can open the Additional Software configuration window from the notification
3.829
And
I shutdown Tails and wait for the computer to power off
2:3.199
And
I start Tails from USB drive "__internal" with network unplugged
1:3.473
And
I enable persistence
11.898
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
41.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.528
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102