And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.350
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.160
And
I accept adding "cowsay" to Additional Software
6.909
And
Additional Software is correctly configured for package "cowsay"
0.887
And
I shutdown Tails and wait for the computer to power off
6.433
And
I start Tails from USB drive "__internal" with network unplugged
1:0.537
And
I enable persistence
10.723
And
I configure APT to prefer an old version of cowsay
0.058
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
39.710
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.468
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.088
And
available upgrades have been checked
0.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.877
And
I can open the Additional Software configuration window from the notification
2.700
And
I shutdown Tails and wait for the computer to power off
2:7.304
And
I start Tails from USB drive "__internal" with network unplugged
1:2.131
And
I enable persistence
11.085
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
38.846
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.923
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109