And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.001
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.627
And
I accept adding "cowsay" to Additional Software
4.472
And
Additional Software is correctly configured for package "cowsay"
1.060
And
I shutdown Tails and wait for the computer to power off
7.258
And
I start Tails from USB drive "__internal" with network unplugged
1:12.151
And
I enable persistence
22.060
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
45.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.103
And
the network is plugged
0.106
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.789
And
I can open the Additional Software configuration window from the notification
4.686
And
I shutdown Tails and wait for the computer to power off
12.651
And
I start Tails from USB drive "__internal" with network unplugged
1:3.863
And
I enable persistence
15.823
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
44.349
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.107
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100