And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.026
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.855
And
I accept adding "cowsay" to Additional Software
4.553
And
Additional Software is correctly configured for package "cowsay"
0.965
And
I shutdown Tails and wait for the computer to power off
6.199
And
I start Tails from USB drive "__internal" with network unplugged
1:4.943
And
I enable persistence
12.397
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
41.585
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.075
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.096
And
available upgrades have been checked
1.188
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.329
And
I can open the Additional Software configuration window from the notification
2.938
And
I shutdown Tails and wait for the computer to power off
2:7.417
And
I start Tails from USB drive "__internal" with network unplugged
1:4.975
And
I enable persistence
11.867
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
40.256
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.319
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090