And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:48.551
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.751
And
I accept adding "cowsay" to Additional Software
5.362
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
6.383
And
I start Tails from USB drive "__internal" with network unplugged
59.591
And
I enable persistence
13.167
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
40.068
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.299
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.076
And
available upgrades have been checked
1.224
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.785
And
I can open the Additional Software configuration window from the notification
2.443
And
I shutdown Tails and wait for the computer to power off
2:7.699
And
I start Tails from USB drive "__internal" with network unplugged
1:0.164
And
I enable persistence
11.805
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
42.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.114
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096