And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:53.681
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.690
And
I accept adding "cowsay" to Additional Software
6.839
And
Additional Software is correctly configured for package "cowsay"
1.020
And
I shutdown Tails and wait for the computer to power off
6.572
And
I start Tails from USB drive "__internal" with network unplugged
1:1.969
And
I enable persistence
12.682
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
40.949
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.956
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.064
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.589
And
I can open the Additional Software configuration window from the notification
2.396
And
I shutdown Tails and wait for the computer to power off
18.010
And
I start Tails from USB drive "__internal" with network unplugged
1:2.690
And
I enable persistence
13.100
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
45.837
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.528
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102