And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.567
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.698
And
I accept adding "cowsay" to Additional Software
6.860
And
Additional Software is correctly configured for package "cowsay"
0.920
And
I shutdown Tails and wait for the computer to power off
6.367
And
I start Tails from USB drive "__internal" with network unplugged
1:1.812
And
I enable persistence
11.822
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
39.981
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.473
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.074
And
available upgrades have been checked
1.169
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.145
And
I can open the Additional Software configuration window from the notification
2.700
And
I shutdown Tails and wait for the computer to power off
2:8.254
And
I start Tails from USB drive "__internal" with network unplugged
1:0.453
And
I enable persistence
10.500
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
39.903
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.294
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112