Project Number Date
test_Tails_ISO_20861-allow-close-zenity-exit-code 2 31 Mar 2025, 20:30

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 75 0 0 0 0 75 10 0 10 20:29.766 Passed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
27.534
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.020
Given I have started Tails from DVD without network and logged in 9.555
And I temporarily create a 4 GiB disk named "gptfat" 0.051
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.365
And I plug USB drive "gptfat" 2.524
When I start Tails Installer 8.981
Then I am told by Tails Installer that the destination device "is too small" 0.056
After features/support/hooks.rb:330 0.852
After features/support/hooks.rb:100 0.001
Tags: @product
20.210
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 8.428
And I temporarily create a 7200 MiB disk named "temp" 0.095
And I start Tails Installer 8.825
But a suitable USB device is not found 0.027
When I plug USB drive "temp" 2.421
Then the "temp" USB drive is selected 0.189
When I unplug USB drive "temp" 0.196
Then a suitable USB device is not found 0.025
After features/support/hooks.rb:330 0.845
After features/support/hooks.rb:100 0.000
Tags: @product
2:39.562
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Given I have started Tails from DVD without network and logged in 8.490
And I temporarily create a 7200 MiB disk named "install" 0.062
And I create a gpt partition with a vfat filesystem on disk "install" 6.468
And I plug USB drive "install" 2.485
And I install Tails to USB drive "install" by cloning 1:57.172
Then the running Tails is installed on USB drive "install" 18.806
And there is a random seed on USB drive "install" 5.993
But there is no persistence partition on USB drive "install" 0.083
After features/support/hooks.rb:330 2.084
After features/support/hooks.rb:100 0.136
Tags: @product
2:28.666
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 8.284
And I temporarily create a 7200 MiB disk named "install" 0.047
And I plug USB drive "install" 2.671
And I install Tails to USB drive "install" by cloning 1:55.169
Then the running Tails is installed on USB drive "install" 15.903
And there is a random seed on USB drive "install" 6.075
But there is no persistence partition on USB drive "install" 0.515
After features/support/hooks.rb:330 2.800
After features/support/hooks.rb:100 0.135
Tags: @product
3:15.078
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.517
And I create a file in the Persistent directory 0.218
And I temporarily create a 7200 MiB disk named "install" 0.269
And I create a gpt partition with a vfat filesystem on disk "install" 6.647
And I plug USB drive "install" 2.579
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:20.561
Then the running Tails is installed on USB drive "install" 21.276
And there is a random seed on USB drive "install" 6.079
And there is a persistence partition on USB drive "install" 0.072
And the USB drive "install" contains the same files as my persistent storage 3.855
After features/support/hooks.rb:330 1.963
After features/support/hooks.rb:100 0.134
Tags: @product
2:43.836
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.063
And I temporarily create a 7200 MiB disk named "install" 0.063
And I plug USB drive "install" 2.528
And I install Tails to USB drive "install" by cloning 1:59.359
Then the running Tails is installed on USB drive "install" 22.715
And there is a random seed on USB drive "install" 7.031
And there is no persistence partition on USB drive "install" 0.075
After features/support/hooks.rb:330 2.207
After features/support/hooks.rb:100 0.114
Tags: @product
2:52.520
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.012
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.677
And I have started Tails from DVD without network and logged in 11.213
And I clone USB drive "__internal" to a temporary USB drive "install" 1.262
And I plug USB drive "install" 2.546
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:58.719
Then the running Tails is installed on USB drive "install" 21.776
And there is a random seed on USB drive "install" 6.071
And there is no persistence partition on USB drive "install" 0.254
After features/support/hooks.rb:330 2.439
After features/support/hooks.rb:100 0.109
Tags: @product @uefi
2:10.934
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.019
And I power off the computer 0.377
And the computer is set to boot in UEFI mode 0.051
When I start Tails from USB drive "__internal" with network unplugged and I login 1:52.804
Then Tails is running from USB drive "__internal" 0.389
And the boot device has safe access rights 3.232
And Tails has started in UEFI mode 0.060
After features/support/hooks.rb:330 0.814
After features/support/hooks.rb:100 0.008
Tags: @product
1:55.844
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 8.512
And I plug and mount a USB drive containing a Tails USB image 44.036
And I create a 7200 MiB disk named "usbimage" 0.044
And I plug USB drive "usbimage" 2.421
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:0.830
After features/support/hooks.rb:330 3.599
After features/support/hooks.rb:100 0.124
Tags: @product
1:35.577
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given a computer 0.182
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:34.039
Then Tails is running from USB drive "usbimage" 0.373
And the label of the system partition on "usbimage" is "Tails" 0.325
And the system partition on "usbimage" is an EFI system partition 0.227
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.155
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.098
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.084
And the system partition on "usbimage" has the expected flags 0.089
After features/support/hooks.rb:330 0.765
After features/support/hooks.rb:100 0.008