And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.062
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.516
And
I accept adding "cowsay" to Additional Software
2.099
And
Additional Software is correctly configured for package "cowsay"
0.937
And
I shutdown Tails and wait for the computer to power off
6.398
And
I start Tails from USB drive "__internal" with network unplugged
1:0.114
And
I enable persistence
12.153
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
38.245
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.069
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.949
And
I can open the Additional Software configuration window from the notification
2.023
And
I shutdown Tails and wait for the computer to power off
11.124
And
I start Tails from USB drive "__internal" with network unplugged
1:1.191
And
I enable persistence
12.308
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.815
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.759
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.100
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092