And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:4.867
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.143
And
I accept adding "cowsay" to Additional Software
8.588
And
Additional Software is correctly configured for package "cowsay"
1.137
And
I shutdown Tails and wait for the computer to power off
10.596
And
I start Tails from USB drive "__internal" with network unplugged
1:12.923
And
I enable persistence
19.634
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
56.074
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.299
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.093
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.614
And
I can open the Additional Software configuration window from the notification
3.142
And
I shutdown Tails and wait for the computer to power off
2:9.273
And
I start Tails from USB drive "__internal" with network unplugged
1:20.290
And
I enable persistence
20.701
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
54.074
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.858
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
the network is plugged
0.112
Then
the Additional Software upgrade service has started
0.239
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.142