And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:33.654
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.863
And
I accept adding "cowsay" to Additional Software
7.842
And
Additional Software is correctly configured for package "cowsay"
1.456
And
I shutdown Tails and wait for the computer to power off
11.535
And
I start Tails from USB drive "__internal" with network unplugged
1:24.255
And
I enable persistence
18.080
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.119
And
I log in to a new session
1:1.580
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
34.005
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.101
And
I prepare the Additional Software upgrade process to fail
0.175
And
the network is plugged
0.078
And
available upgrades have been checked
1.177
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.245
And
I can open the Additional Software configuration window from the notification
3.241
And
I shutdown Tails and wait for the computer to power off
2:10.036
And
I start Tails from USB drive "__internal" with network unplugged
1:21.700
And
I enable persistence
18.115
And
I configure APT to prefer an old version of cowsay
0.047
And
I log in to a new session
49.089
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
47.025
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.230
And
the network is plugged
0.425
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095