And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.918
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.605
And
I accept adding "cowsay" to Additional Software
4.807
And
Additional Software is correctly configured for package "cowsay"
0.717
And
I shutdown Tails and wait for the computer to power off
8.213
And
I start Tails from USB drive "__internal" with network unplugged
39.972
And
I enable persistence
6.970
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
12.538
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.019
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.082
And
I can open the Additional Software configuration window from the notification
2.590
And
I shutdown Tails and wait for the computer to power off
22.910
And
I start Tails from USB drive "__internal" with network unplugged
38.990
And
I enable persistence
7.207
And
I configure APT to prefer an old version of cowsay
0.070
And
I log in to a new session
11.304
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.260
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073