And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.688
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.798
And
I accept adding "cowsay" to Additional Software
5.063
And
Additional Software is correctly configured for package "cowsay"
0.761
And
I shutdown Tails and wait for the computer to power off
4.235
And
I start Tails from USB drive "__internal" with network unplugged
37.406
And
I enable persistence
7.410
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
11.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.631
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.017
And
available upgrades have been checked
2.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.495
And
I can open the Additional Software configuration window from the notification
2.576
And
I shutdown Tails and wait for the computer to power off
17.330
And
I start Tails from USB drive "__internal" with network unplugged
37.601
And
I enable persistence
6.285
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.210
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084