And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.954
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.284
And
I accept adding "cowsay" to Additional Software
4.810
And
Additional Software is correctly configured for package "cowsay"
0.623
And
I shutdown Tails and wait for the computer to power off
4.073
And
I start Tails from USB drive "__internal" with network unplugged
37.735
And
I enable persistence
11.260
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.823
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.017
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.598
And
I can open the Additional Software configuration window from the notification
2.792
And
I shutdown Tails and wait for the computer to power off
22.028
And
I start Tails from USB drive "__internal" with network unplugged
38.374
And
I enable persistence
10.591
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.375
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.104
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085