And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.320
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.110
And
I accept adding "cowsay" to Additional Software
4.884
And
Additional Software is correctly configured for package "cowsay"
0.716
And
I shutdown Tails and wait for the computer to power off
7.975
And
I start Tails from USB drive "__internal" with network unplugged
37.126
And
I enable persistence
5.820
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
10.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.556
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
2.169
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.543
And
I can open the Additional Software configuration window from the notification
2.591
And
I shutdown Tails and wait for the computer to power off
17.796
And
I start Tails from USB drive "__internal" with network unplugged
37.120
And
I enable persistence
6.806
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.500
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.599
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063